|
|
Diagnostic Home . Diagnostic Product Index . Customer Care |
|
|||||||
|
You are currently NOT logged in to a registered account. Some functions of Snap-on Diagnostics Product Forums will not be available to you if your are not logged in as a registered member. For a limited time only, registrationto Snap-on Diagnostics Product Forums to Snap-on Diagnostics Product Forums is !! FREE !! Select the **REGISTER NOW** link to register for your FREE Snap-on Diagnostics Product Forums account!! |
 |
|
|
Thread Tools | Display Modes |
|
#1
10-28-2020, 05:57 AM
|
||||
|
||||
ford calibration ID's
It would be nice if SO gave us a current calibration ID in correct form instead of a HEX code. Is there anywhere you can find a cross reference for HEX codes?
Paying for a subscription to FJDS is a option and using PTP4 to access it, but it would nice if we could access it right through scan tool somehow. Or how about just giving a option to access it in OBD2 data somewhere. 
|
|
#2
10-28-2020, 06:50 AM
|
||||
|
||||
|
I also posted this on another J2534 forum, already got responses. It is available with PTP4 toolbox. Open J2534 toolbox, go to North America Ford section. There is a line to get part numbers. It brought it right up. So I guess as along as you have a Pass Through device, you can get it, but it would be easier if Snapon scanners could provide it because chances are, we already have that hooked up.
|
|
#3
10-28-2020, 11:59 AM
|
||||
|
||||
|
Using Mode 9 of OBDII, this is what I get: actual FORD CAL IDs, the same as reported by IDS.
20201028-1345-1.jpg 20201028-1344-1.jpg
__________________
S. Breland
|
|
#4
10-29-2020, 04:53 AM
|
||||
|
||||
|
I'm working on a 2003 lincoln LS and all my solus or verus edge show as mode 9 data is a 1 line as "JIANCSB" there are no other lines that transfer to a ford calibration ID. My Solus is on 20.4 also.
I can't figure out how to attach a screenshot or I would. I can't remember ever being able to read calibration ID's on any Ford from a SNapon scanner.
|
|
#5
10-29-2020, 12:56 PM
|
||||
|
||||
|
As an employee of a Ford dealership, I assure you these are actual CORRECT software part numbers. See this from IDS:
20200206-1628-1.jpg 20200417-1027-1.jpg
__________________
S. Breland
|
|
#6
11-04-2020, 06:22 AM
|
||||
|
||||
|
I see last 2 screenshot, you are using IDS and also I recognize calibration numbers with "12A650" in it as being correct. However in your mode 9 screen shots, I see nothing that has "12A650 " in it that is a correct calibration ID. There is also another thread just before mine that says MODE 9 data does not match either.
|
|
#7
11-04-2020, 07:47 AM
|
||||
|
||||
|
Screenshots taken from different vehicles, so yes the CAL IDs will be different.
__________________
S. Breland
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
