communication with pass thru pro2 and tech 2win

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • adieselman2
    Junior Member
    • Feb 2012
    • 1

    communication with pass thru pro2 and tech 2win

    When i down load the tech 2 win program it will not communicate with the pass thru pro. Using the j2534 tool box program i can communicate with the pass thru pro.
  • greasybob
    Senior Member
    • May 2008
    • 1590

    #2
    Are there two green lights lit up on the PTP2 ? Does the cose interface menu appear on the tech2win screen ? Is the PTP2 powered and plugged in to the lap top before you open the Tech2win application ?

    Comment

    • Spotnoid42
      Junior Member
      • Apr 2011
      • 14

      #3
      TechII Win

      Don't use the TechII Win program that is not for a J2534 device!

      Comment

      • crackerclicker
        Senior Member
        • May 2008
        • 400

        #4
        Originally posted by Spotnoid42
        Don't use the TechII Win program that is not for a J2534 device!
        Huh??

        Comment

        • Steve6911
          Moderator
          • Feb 2007
          • 2168

          #5
          Use the Link that Larry posted to get to Drewtechs site. Toward the bottom of the page is another link to the drivers that need to be installed for the PTPII to work with Tech2Win.

          Steve

          Comment

          • Spotnoid42
            Junior Member
            • Apr 2011
            • 14

            #6
            TechIIWin

            My bad, this is news to me. Thanks for the link, it seams several manufacturers at beginning to use the j2734 as a scanner.

            Comment

            • eddie8
              Senior Member
              • Mar 2008
              • 273

              #7
              Guys, as of current, the tech2win software is only "supported" for the mdi and the drewtech cardaq=m interfaces. Others might be added at a later date.
              Edwin Hazzard
              Southeast Mobile Tech

              Comment

              Working...