|
|
Diagnostic Home . Diagnostic Product Index . Customer Care |
|
|||||||
|
You are currently NOT logged in to a registered account. Some functions of Snap-on Diagnostics Product Forums will not be available to you if your are not logged in as a registered member. For a limited time only, registrationto Snap-on Diagnostics Product Forums to Snap-on Diagnostics Product Forums is !! FREE !! Select the **REGISTER NOW** link to register for your FREE Snap-on Diagnostics Product Forums account!! |
 |
|
|
Thread Tools | Display Modes |
|
#1
03-19-2021, 11:02 PM
|
||||
|
||||
New Diagnostic Thermal Imager Elite EETH310
Hello, I just purchased a Diagnostic Thermal Imager,EETH310 and I have found that it's reading 10 degrees out of range actually high. I know about the tool. I have an EETH300 and EETH311, also CTG761, and Temp200. They all read right, but the new EETH310 is always wrong. I tried recalibrating it, and I also did a reset with no luck. I do not want to return it to my snap-on dealer. I have purchase over 100's of thousands of dollars in my 44 year. Has anybody experience the same problems.
|
|
#2
03-24-2021, 03:52 AM
|
||||
|
||||
|
Larry
Why would you not give it back to your dealer if something is wrong with it? Maybe he has or can get another one to compare the readings with.
|
|
#3
03-25-2021, 09:24 PM
|
||||
|
||||
|
I spent hours trying different thermal imagers and Laser guns. So the dealer did get me another unit, and it acted close to the same. I tried other surfaces and recalibrations. I will have to return it for a refund because it works just like the original Now, the EETH311 works great, and a valuable tool also the EETH300 and CTG761 with a contact probe. Also Temp200.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
