Mode 9 data does not match Ford Calibration Number

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Pythagorous
    Junior Member
    • Mar 2017
    • 10

    Mode 9 data does not match Ford Calibration Number

    When I get the Mode 9 Calibration ID it does not look at all like the software part number Ford shows for the vehicle, for example, a 2015 Escape according to Ford's Latest Calibration should have FJ5A-PA and I get FJ5APA from FJDS but my Solus Edge, my Cardaq Plus 2 and everything else I have tried shows GFBPABA.H32 which is an entirely different format. And then, from Ford PTS I see for Engine Calibration FM21B20A

    Is there some kind of cross-reference that needs to be made?

    Thanks in advance,
    Gary
    Last edited by Pythagorous; 10-13-2020, 08:27 PM. Reason: added specific part number and cal ids
  • jm43130
    Senior Member
    • Apr 2008
    • 182

    #2
    I started another thread because I didn't see this. MIne neither shows correct cal Id's. I was working on a 2003 lincoln LS v-8.
    SBRELAND73 said his did in mode 9 and sent some screen shots, but I'm not sure they are correct either. I was able to get it because I have a PTP4 and could go to J2534 Toolbox and get it there. It would be a lot easier on guys to TSB's if we could get current cal ID's.

    Comment

    Working...