![]() |
Diagnostic Home . Diagnostic Product Index . Customer Care |
|
You are currently NOT logged in to a registered account. Some functions of Snap-on Diagnostics Product Forums will not be available to you if your are not logged in as a registered member. For a limited time only, registrationto Snap-on Diagnostics Product Forums to Snap-on Diagnostics Product Forums is !! FREE !! Select the **REGISTER NOW** link to register for your FREE Snap-on Diagnostics Product Forums account!! |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]() I hooked up to vehicle and got error message something about mount with something. Then kept going to power down cancel page. Battery was low so I charged battery with unit off and kept coming on by itself and charged until green light came on. I was sleeping and heard it beeping and screen flickering so I removed the battery and battery by the way said low. So I bought a new battery from snap on and am charging it keeps coming on by itself error warning power down confirm cancel. I don't use often. It will still work on car without battery installed. I think it is possessed. Anyone ever have this problem? Thanks.
|
#2
|
|||
|
|||
![]() I replaced battery and now if you plug in it starts shows a startup screen then shuts down. Any ideas anyone? I took apart looking for a burn spot on board. There is a 3 volt watch battery inside. It tested 3v. I wonder how much to fix. Has 17.4 software.
|
#3
|
|||
|
|||
![]() Quote:
There is someone on eBay.com who repairs the standard Solus and they ' may ' do the Pro too, I do not know. This is the eBay link for you to " ask the question " :- https://www.ebay.com/itm/Snap-On-Sol...cAAOSwNyVaekns |
#4
|
|||
|
|||
![]() This is a solus ultra
|
![]() |
Thread Tools | |
Display Modes | |
|
|