zeus Win 7 to Win 10 Enterprise
So i been reading all the port of updating a Zeus and Verus. I was able to clone my original hard drive on my Zeus and pilot it over to a 256G m2nvme SSD. loaded windows 10 enterprise no problem. manage to load everything else i get 2 errors, one is known which is the S button, but windows 10 loads its own driver for the button which works will. diagnostic suite and shop stream connect are the two i have issues with. so for now i am back to Win7 embedded until i can figure out what i missed. I believe its because the serial number and name of device is not showing due to missing license file. License is not in the same as the Verus.
any assistant would be appreciative.
-
i saw a video on you tube a guy updating is verus to windows 7 .and i sent a message to him and he said wind 10 installs the same.haven t tried it yet hope this helpsLeave a comment:
-
turned on net 2 / 3.5 & legacy components - now back to 1 error on install. The snapon button task error.
its prob something really stupid but, I'll never know.
How cool would it b for tech support to chime in with a solution?
Leave a comment:
-
that sucks, well, i think if you send in the zeus snap on is upgrading to win10 but you have to pay for it, around $ 250 I think.
then in theory, just do a straight clone of that to the upgraded 1 TB SSD and you should be good.
other than that, sorry, im at a end.Leave a comment:
-
I think diagnostic suite only works with 32 bitIt didnt work
If anything, I had another error in addition to the 1st one.
32bit OS & x64 processor? Zeus CPU is 64bit? Should I install 64bit LTSC?
https://imgur.com/untajbDLeave a comment:
-
We need an updated shopstream update tool for windows 10. I updated my verus edge and that is the only issue im having.Leave a comment:
-
Was trying W10 update from a 19.2 image.
Put old image (Win7 Embedded) back on and noticed a bunch of updates that just came thru including NET 4.8.
May try to image SSD again from current 19.2.2, copy license + drivers folder to D then format C and install Win10 LTSC. I then install all drivers & make sure device manager is clear of faults. Install DIAG suite, copy license back to C then reboot.Leave a comment:
-
what SW version are you running??
snap on just release another service release for 19.2 for the windows scan tools
now 19.2.2 is the latest.
the update says they included Microsoft .NET V 4.8.
maybe a issue???Leave a comment:
-
Tried that with same result.Leave a comment:
-
Not sure if there's any difference, but from what I read, it's suppose to be Windows 10 embedded not Windows 10 32bit? Again, I'm not sure, but maybe that could be where the problem lies? Either way, hopefully you can get this sorted out.
Leave a comment:
-
ZEUS Windows 10 upgrade new SSD & 4gb ram
Upgraded SSD to 1TB and ram to 4gb (see pics).
Cloned drive with Acronis results in 700+gb drive C & 180+gb drive D.
Boots up & runs all including updates perfectly on Win7.
Copy license file & drivers folder to drive D.
Try installing win10pro32bit via boot flash, format drive C & install Win10.
Install all drivers & enable NET 2.0 . / 3.5 in windows features.
Device manager perfectly clear.
Tried installing diagnostic suite & always end up with 1 error at the end & because of error, I can never launch suite as i get a hardware initialization failure.
Scope driver seems good.
Something to do with that task button xml.
Any help would be greatly appreciated.
Last edited by Signature; 02-07-2020, 09:34 AM.
Leave a comment: