Mazda Pats reset Parameter MMP

[abdiel]

Hi.
somebody have a example o video tutorial to use pats functions - reset parameter in mazda rx8 07??
i have a problem, i did the session complete and then program de keys, but the car is not star.
thaks for anything!!!

[Witsend]

not sure it works but sounds like it's worth a try.

http://pro.auteltech.com/autelsupport/Diagnostic%20System/23661.jhtml?res=autelsupport%2Fr%2Fautel%2Ftpc%2F&location=http%3A%2F%2Fpro.auteltech.com%2Fautelsupport%2Fpost%2Fo_update.jspx&locale=en_US&_start_time=1499658105247&hrefLatter=.jspx&hrefFormer=o&pageNo=1&resSys=%2Fautelsupport%2Fr%2Fautel&href=o_update.jspx

https://www.youtube.com/watch?v=55l-MZv19so

[ToltecasChavez]

You will need 2 Keys. That is 100% guarantee. Then, follow Witsend's instructions. You will need incode and outcodes. Not hard to do. I have done a bunch of mazdas. Good Luck! This is using Passthru device. You can use Ford software and do key programming using a passthru device. I use a VCMII and use Ford IDS, still works.

[abdiel]

You will need 2 Keys. That is 100% guarantee. Then, follow Witsend's instructions. You will need incode and outcodes. Not hard to do. I have done a bunch of mazdas. Good Luck! This is using Passthru device. You can use Ford software and do key programming using a passthru device. I use a VCMII and use Ford IDS, still works.

I did reset parameters succesful, an then program the 2 keys. I need progam the 2 keys frist ?? thank u for your help !

[Tech10]

It all depends on what was done to the vehicle. Was a module replace? Were all the keys lost? In order to help you we need to know more or all the info.

[abdiel]

It all depends on what was done to the vehicle. Was a module replace? Were all the keys lost? In order to help you we need to know more or all the info.

Thanx for your help. Result it turns out the reset parameter pats it worked. the problem is the can bus. i replaced the pcm. Thanx for you help!! Good Day