Flexible Gas Analyzer

[Jeffrey Jake]

Hello,
As some of you know, the FGA was discontinued. I had my local rep inquire on any information for a replacement. This was a dead end. Is a replacement in the near future? If so, when might it be available? Thanks in advanced for any information.

Jeffrey

[Camarosmlblk]

Jeffrey,
The New FGA in currently for sale. part # EEEA305A

[Jeffrey Jake]

Camarosmlblk,
Thanks for the reply. I purchased the FGA prior to your response. My dealer came through with the needed information after contacting the correct person.
Are you using this model ? After using it on the second vehicle was receiving low flow faults. The water trap was dry but moisture had triggered the upper filter after water trap on top of water trap. Looks like a wafer. The PC based diagnostic also flagged a fault for the o2 sensor. Sure was from a result of moisture intrusion. This was found after a representative called and walked me through some procedures that are not in the manual. It was returned in exchange for a different unit. I requested that I be contacted so that the root cause could be determined if possible. Either operator error or equipment fault so that future problems of the same issue don't return if it was on my error. Any information other than what is in manual available ? Thanks for your time.
Jeffrey

[Jeffrey Jake]

The little wafer is actually a membrane filter part number EEEA305A-11. The inline filter is EEEA305A-12, Don't have part number for the water trap filter, will have when they come in. Not sure what the root cause was only an opinion that the membrane filter and the water trap filter caused the problems that I was having. I ordered multiples of these filters to have on hand. If anyone using this product on a daily basis could lend some information regarding these filters and frequency of replacement, I would be thankful. TIA

Jeffrey