mode 6 chrysler misfire test id number.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • chevette20
    Junior Member
    • May 2008
    • 6

    #1

    mode 6 chrysler misfire test id number.

    Could not find test id number for 2001 jeep cherokee sport 4.0l for misfire information. Thank you!
  • MasterWrench
    Senior Member
    • Oct 2006
    • 1183

    #2
    I found a list here: http://www.d-tips.com/General/Mode$06/Default.aspx?G=2001_Chrysler

    Does not look like misfire is in Mode 6 info. Have you tried looking in all of the available data screens to see if it is not available there? Special Tests"? In the troubleshooter etc... I am not at work so I do not have my MODIS to check it out....
    MasterWrench

    Comment

    • Jeffrey Jake
      Member
      • May 2007
      • 34

      #3
      chevette20, MasterWrench,
      It's in system test when your in Chrysler. HTH

      Jeffrey

      Comment

      • Joe Rappa
        Snap-on DSD
        • Aug 2007
        • 2182

        #4
        You can find Mode 6 for most every car line in Shopkey/Mitchell. I checked, and there is no Mode 6 test results for misfires for that vehicle.
        Joe
        "You don't build a reputation on what you're going to do"
        Henry Ford

        Comment

        • Jeffrey Jake
          Member
          • May 2007
          • 34

          #5
          Sorry about the mis information, I should have said misfire counters are available in system test if that helps you.

          Jeffrey

          Comment

          • KM@PROAUTOTECH
            Senior Member
            • Oct 2007
            • 358

            #6
            Originally posted by chevette20
            Could not find test id number for 2001 jeep cherokee sport 4.0l for misfire information. Thank you!
            Mode 6 Misfire on Chrysler/Jeep not used because it is already a factory pid option from systems tests as Jeff has mentioned.

            Comment

            • chevette20
              Junior Member
              • May 2008
              • 6

              #7
              mode 6 information.

              Thank you for the information everybody. I had a po300 and was trying to pin point it to a cylinder. I will do more testing to narrow it down. Thanks again. Scott...

              Comment

              Working...