My 06 Tacoma 4.0 A750e Trans Is Leaking From The Bell Housing..i Pulled It Torque Converter Bushing Had Spun In The Pump..soo New Pump New Converter But Continues To Leak I Now Have It Out For The Third Time The Truck Has 70,000 On It Warranty Over With At 60k.no One In Knoxville Seems To Know Ive Had The Best Trans Guys In The Area Look And Test But No Results,toyota Does Not Have A Trani Guy They Just Install 5000.00 Dollar Toyota Reman Units...now Im Begging You Guys For Help For Me All Advice Is Welcome And Appreciated.thx Everyone In Advance!!!
-
-
Check the cooler to see if it's plugged or restricted. That could have caused the bad pump bushing, and the leak."You don't build a reputation on what you're going to do"
Henry Ford -
Im Sorry I Flushed The Cooler Already It Was Clear No Restriction Thank You ThoughComment
-
Read somewhere awhile back of a ground issue on a (I don't remember what vehicle), causing an arc at the converter bushing, which in turn would cause it to spin lose and ruin the seal. Just a thought.S. BrelandComment
-
Does the bell housing have a vent in it or going to it. I can't recall maybe it was a ford that had this issue but it would vent inside a cavity in the bell housing and look like the converter but if you looked in side with a mirror it was dry as a bone...
I believe I have also heard of the arcing issue causing the bushing to spin.
Did you reuse the Pump Bolts??? If so did they have little o-rings on them??? If so look closely and see if its leaking from one of those.Comment
-
No Arcing And The Pump Bolts Were Sealed With Silicone But Thanks.lets Keep Trying Guys Its Still Got MeComment
Comment