SureTrack Users General Discussion

[dodge90]

Yeah the TAC and ECM have scenarios where cranking is inhibited if it knows it cant control engine speed, or determine what idle would be.

Thanks Maven. Figured if anyone knew you would. Makes sence and thats what I was figuring. Boss wanted me to replace the starter, tow truck driver said it needed a fuel pump LOL

[Crusty]

Thanks Maven. Figured if anyone knew you would. Makes sence and thats what I was figuring. Boss wanted me to replace the starter, tow truck driver said it needed a fuel pump LOL

I guess the Boss and the tow truck driver looked it up on IDENTA-GUESS-!! LMAO-!!

[Crossland Auto]

Tow truck drivers always say it needs a fuel pump. There is a reason why, they usually do. LOL.

On a side note: most people that know me say I spend too much money on the tool trucks buying items that are cool looking, or just cute.

An item I bought probably 10 - 12 years ago (that I paid way too much for) just came to use when installing a radiator in a class A Bounder motor home. A scissor jack was useful compressing the left side of the cap to get the holes to line up. The right side was a bit busier, the dog house was built in a way that the scissor jack would not work. I remembered I had this, added a 4x4, worked perfect.

X

[Crusty]

THAT little jack is way TOO COOL-!!!

[maven]

LMFAO, thats f@$!>&$ great!!!!

I still dont wanna work on anymore RV's, especially ClassA's.

I just had a 35' Workhorse P32 chassis'd 8.1L Vortec gas engine that I had to remove 4 broken exhaust studs, all the EGR studs, and an oil change.
Straight time I was on it for just under 14 hrs. I wouldnt do it again unless I was gettin time-and-a-half.

Theres a reason I left the family trade of marine mechanics one year after vocational school. Working on pleasure craft sucks.

[dodge90]

cool jack, now I need to look for one. Yea wount work on class A but the class C i do work on, kinda hard to say not going to work on them when i own one. Boss would like that, good thing I only have a few customers with them. Unless one brakes down on near by hwy but thats far and few.

[liljoe]

Hey X, does that cool lil jack have any part numbers or anything on it that could be used to try to source one of those. I have this need for one now. Never knew I needed one till I saw yours.....

[Crossland Auto]

We are on the right site I guess. It was sold on the Snap On truck. Maybe find a route driver that has been around a while. If I remember right, they came around about the same time as Harbor Freight started selling their Aluminum Race Jack. Maybe Central Hydraulics made them. I will post a picture in a little bit.

X

[Crossland Auto]

Here is picture.

[cruisinmiles]

Snap-On was in today and I showed him the picture of the little floor jack and he says he can still get it! IF he is right I will post the product # for all who are interested. I wanted one right after I saw X's photo, and it may come in handy for me as it did for him.

[Witsend]

Just say no to Rosey Palms and Gantry Chains

and get yourself a Mini Jack LOL

[liljoe]

http://www.ebay.com/itm/Mini-Hydraul...p2054897.l4275

[DoctorD907]

I have some nice pliers that would go nicely with that jack...

https://www.youtube.com/watch?v=uf0Y8mnEnuE

[maven]

Happy Star Wars Day!


May the Fourth be with you

[Witsend]

Happy Star Wars Day!


May the Fourth be with you

...and a Happy Cinco De Mayo Tomorrow